HVAC in Richmond, IL
Reach independent HVAC companies that serve Richmond. No obligation to hire.
Talk to a local HVAC company in Richmond now.
Homeowners pay nothing to use Swupi. We connect you with independent local pros; we are not a contractor. Calls may be recorded and connected to a service provider.
Rather not call? Send a request
Looking for HVAC help in Richmond? About 2,600 people live in the city's roughly 1,400 homes, and the median home was built in 1992. McHenry County is in climate zone 5A (cool, humid), which shapes what heating and cooling work involves here. Use the notes below before you call, then reach an independent HVAC company that serves Richmond.
This page covers Richmond and its 1 ZIP code. When you call or send a request, your ZIP code decides which company can take it.
What Richmond homeowners should know about HVAC
The median home in Richmond was built in 1992, and about 29% were built before 1980. Equipment installed when many of these homes were built is at an age where repair-or-replace decisions come up. Ask for both options in writing.
The U.S. Department of Energy places McHenry County in climate zone 5A (cool, humid). Heating carries most of the load here. If you are considering a heat pump, ask whether the model is rated for cold climates and how backup heat works. In a humid climate, ask how the system will control indoor humidity, not just temperature. Whatever the climate, ask for a room-by-room load calculation (ACCA Manual J) instead of matching the size of the old unit.
About 47% of occupied homes in Richmond heat with utility gas and 50% with electricity. Electric heat is the norm, so ask whether your home has a heat pump or electric resistance heat. Replacing resistance heat with a heat pump usually uses much less electricity.
About 45% of homes in Richmond are in buildings with five or more units. Apartments and condos may have their own systems or share a central one, so check what your building allows before replacing equipment.
Permits and licenses in Richmond
Replacing a furnace, air conditioner or heat pump usually needs a mechanical permit and a final inspection. In Richmond, permits come from the city's building department, or from McHenry County for addresses outside city limits. Ask the company who pulls the permit, and keep a copy of it.
Illinois has no statewide general contractor license; IDFPR licenses roofing contractors. For other trades, ask your city or county building department which license applies, and ask the company for its license number.
Look up a license: Department of Financial and Professional Regulation
Questions to ask an HVAC company in Richmond
- Will you do a load calculation (ACCA Manual J) before recommending a size?
- What efficiency ratings (SEER2, HSPF2 or AFUE) does each option have?
- Who pulls the permit, and is the final inspection included?
- What warranty covers the equipment, and what covers your labor?
HVAC companies serving Richmond
Company profiles for Richmond are on the way. Call or send a request above to reach a company that covers your ZIP code.
HVAC in Richmond: questions
How old are homes in Richmond?
Census estimates (ACS 2020-2024) put the median build year at 1992, and about 29% of homes were built before 1980. Equipment installed when many of these homes were built is at an age where repair-or-replace decisions come up.
What climate zone is Richmond in?
McHenry County is in IECC climate zone 5A (cool, humid), per the U.S. Department of Energy's county map. Heating carries most of the load here.
How do I check an HVAC company in Richmond?
Illinois has no statewide general contractor license; IDFPR licenses roofing contractors. Ask for the company's license or registration number and look it up with the Department of Financial and Professional Regulation. Also ask for proof of insurance and get the scope in writing.
Do I need a permit for heating and cooling work in Richmond?
Replacing a furnace, air conditioner or heat pump usually needs a mechanical permit and a final inspection. In Richmond, permits come from the city's building department, or from McHenry County for addresses outside city limits. The company you hire usually pulls it.
How does Swupi work in Richmond?
Call or send a request with your ZIP code, and Swupi connects you with an independent HVAC company that serves your area, including nearby Spring Grove, Ringwood and Hebron. You agree on price and timing directly with that company.
Ready to talk to a local HVAC company in Richmond?
Homeowners pay nothing to use Swupi. We connect you with independent local pros; we are not a contractor. Calls may be recorded and connected to a service provider.
Rather not call? Send a request
Nearby cities
- No fee to SwupiHomeowners never pay Swupi.
- No obligationCompare quotes, hire only if it fits.
- Local companiesIndependent pros who serve your area.
- Call or requestTalk now, or send a short request.
